Bernina L860 User Manual page 34

My BERNINA overlocker
Stitch view
Any changes in this stitch view directly affect the stitch and the machine. All displayed values are set by the
machine accordingly.
1
2
3
4
5
6
7
8
Setting with a direct effect on the stitch
• Stitch length setting. (see page 84)
• Differential Feed setting. (see page 78)
• Thread tension adjustment setting. (see page 76)
These settings, or any changes to them, are saved in the Personal Memory when the stitch is saved.
Functions with direct influence on the machine
• Needle stop up/down. (see page 49)
• Sewing speed setting. (see page 56)
These settings or any changes to them, remain active until they are changed again.
34
3
4
1
5
6
2
«Stitch number/name»
«Stitch view»
«Thread tension»
«Needle stop up/down»
«Stitch length»
«Differential Feed»
«Stitch Optimizer»
«Sewing speed adjustment»
7 8
Shows the currently set stitch name with the stitch
number.
Shows the currently set stitch pattern. Can include
multiple views (schematic / real or exploded eg flat
seam).The dots refer to hidden views. Tap to switch
views.
Shows the preset default thread tension value for
each required thread path. Tap to change.
Indicates the position of the needle when the needle
stops. Tap to change.
Indicates the stitch length. Tap to change.
Indicates the preset default value of the Differential
Feed. Tap to change.
Shows possible stitch results with the setting actions
for stitch optimization. Tap to use.
Determines the maximum sewing speed with the foot
control pressed down. Tap to change.