Bernina L860 User Manual page 111

Loading data to the machine
Prerequisite:
• The USB stick with the saved data is inserted.
> To import saved data and settings, tap on the «USB to machine».
> Remove the USB stick.
Starting the firmware update
Prerequisite:
• The latest firmware version is unpacked according to the firmware update installation instructions and
saved on the USB stick.
• Personal data (if desired) are saved on the USB stick before the update.
> Insert the USB stick into the port.
> Tap on «update».
– Wait until the firmware update has finished.
NOTICE Incomplete update due to removing the BERNINA USB stick too early
If the software has not been updated or has not been fully updated, the machine cannot be used.
> Remove the BERNINA USB stick only once the update has been successfully completed.
> Import the saved data, if available.
> Remove the USB stick.
Care and maintenance
111