Remote Switch Signal Connector; Led - JHCTech KMDA-3201 User Manual

2.4.9 Remote Switch signal Connector

For the remote switch signal interface of the switch machine, the terminal of the motherboard coastline is
a 2-pin terminal. Table 2.11 for pin assignments.

2.4.10 LED

There are 1*Power LED, 1*HDD LED, 3*CPU temperature class LEDS on the front. Users can monitor
the working state of the CPU according to the display of LEDs.
Table 2.12 for LEDs state of CPU temperature class.
Figure 2.20 Remote SW Connector
Table 2.11: Remote Switch Pin Assignments
Pin Signal
1 PWR_BTN
2 GND
Table 2.12: LEDs state of CPU temperature class.
LED State
Red Warning
Yellow High
Green Normal
20
User's Manual