User's Manual
2.5 Installation
Here the hardware installation takes KMDA-3201-S00X series for example, and the KMDA-3201-T001
series installation operation is similar.
2.5.1 HDD/SSD Installation
Step 1: Unscrew 4 screws on the bottom cover, remove the bottom bracket;
Step 2: Unscrew 2 screws on the front/rear panel, remove the bottom cover;
Step 3: Put the HDD/SSD in the drive bay and screw 4 screws;
Step 4: Pull the drive bay onto the bottom cover and screw 4 screws, the hard drive direction is as shown;
Step 5: Using the SATA cable connect the HDD/SSD with the mother board;
Step 6: Close the bottom cover back to the chassis. screw 2 screws on the front/rear panel;
Step 7: Install the bottom bracket, screw 4 screws.
21