Table of Contents
Advertisement
User's Manual
Other PCI devices
This item is used to set the EFI PCI device Option ROM boot or the traditional PCI device Option ROM
boot.
▶
USB Configuration
USB configuration, enter this sub-menu, there will be USB-related detailed settings.
Legacy USB Support
This item is used to set the USB interface support. If you need to support USB devices under DOS, such
as U disk, USB keyboard, etc., set this item to [Enabled]. Otherwise, select [Disabled].
USB Mass Storage Driver Support
USB mass storage device support switch.
USB Transfer time-out
This item Sets the timeout period for control, batch, and interrupt transmission. The default is 20 seconds.
Device reset time-out
This item sets boot command timeout of the large capacity USB disk. The default is 20 seconds.
Device power-up delay
This item sets boot command delay of the large capacity USB disk. The default is Auto.
47
Advertisement
Table of Contents
