Meter Storage; Caring For Your Test Strips - Fora MD Owner's Manual

• Do NOT clean and disinfect the meter while performing tests.
• Please follow the instructions on the package label of Micro-Kill+™
disinfecting wipes for safe use of the wipes.
• Do NOT allow cleaning and disinfecting solution to get in the test slot,
battery compartment, or strip-ejection button.
• If you do get moisture in the test strip slot, wipe it away with a corner of
tissue.
• Always dry the meter thoroughly before using it.
• Do not spray the meter directly with cleaning solutions especially those
containing water (i.e. soapy water), as this could cause the solution to enter
the case inside and damage the electronic components or circuitry.

Meter Storage

• Storage conditions: -4°F to 140°F (-20°C to 60°C), below 95%
relative humidity.
• Always store or transport the meter in its original storage case.
• Avoid dropping and heavy impact.
• Avoid direct sunlight and high humidity.

Caring for Your Test Strips

• Storage conditions: 35.6°F to 89.6°F (2°C to 32°C) , 10% to 85%
relative humidity. Do not freeze.
• Store your test strips in their original vial only. Do not transfer to
another container.
• Store test strip packages in a cool dry place. Keep away from direct
sunlight and heat.
38
NOTE