Download Print this page
BDI FLO 7279 Manual

BDI FLO 7279 Manual

Media console

Advertisement

Quick Links

Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Flo Media Console is designed for indoor use on level floors.
Clean painted surfaces and steel parts with a damp cloth.
Flo is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Flo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 06.14.2018 V1
FLO
7279
MEDIA CONSOLE
bdiusa.com
customerservice@bdiusa.com
T1 Hex Wrench x 1
H1 1/4-20 x 12 mm
Screw x 8
H2 M4 x 25 mm
Screw x 8
H5 Cord Wrap x 2
H3 1/4-20 x 75 mm
Flat head Screw x 8
H4 Door Pull x 4
C3 Back Panel x 2
A1 Cabinet x 1
A2 Base Rails x 2
A3 Leg x 2
C1 Center Shelf x 1
C2 Side Shelf x 2
Tool Required:
Phillips screwdriver

Advertisement

loading
Need help?

Need help?

Do you have a question about the FLO 7279 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BDI FLO 7279

  • Page 1 Designed by BDI Studio. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Flo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI Patent: www.bdiusa.com/ip Made in China. 06.14.2018 V1...
  • Page 2 With help from another person, carefully position the cabinet on its back. Attach the base using 8 screws H3 going through the countersunk holes on the base rails and into the threaded holes on the bottom of the cabinet. 2 Person Task H3 x 8 bdiusa.com FLO 7279 customerservice@bdiusa.com MEDIA CONSOLE...
  • Page 3 Turning the leveler clockwise will extend the leveler; turning it counter-clockwise will retract it. 2 Person Task H2 x 8 down bdiusa.com FLO 7279 customerservice@bdiusa.com MEDIA CONSOLE...
  • Page 4 Your Flo Media Console comes with 2 KLEET Cord Wraps H5 pre-installed on the back. The cord wraps can also be installed on the bottom of the cabinet behind the back base rail. Remove the adhesive backing and adhere the Cord Wraps where ever desired. H5 Cord Wrap Optional Position bdiusa.com FLO 7279 customerservice@bdiusa.com MEDIA CONSOLE...
  • Page 5 Example: Tightening screw 1 on top hinge will move the top of the door in the direction shown Example: Adjusting screw 2 on both hinges (same direction) will move the door up or down bdiusa.com FLO 7279 customerservice@bdiusa.com MEDIA CONSOLE...