Overwrite View; Capture View - Honeywell BENDIX KING KMH 880 System Installation Manual

B B
B B
range--
alt--
Ant--
power--

8.1 Overwrite View

On the Intruder Data Menu, click Overwrite View. The user is prompted for the
maximum range in nautical miles-- this allows the user to limit the range at which
intruders are displayed.
When this option is selected, the intruder information is erased before each update
is sent to the screen. It is updated at approximately one TISI per second. To stop
the update, click the Stop button on the button bar.

8.2 Capture View

On the Intruder Data Menu, click Capture View. This option allows the user to cap-
ture specified number of TISI's of data. The number of TISIs to be captured is
entered, then the maximum range is requested (see Overwrite). When the number
of TISIs have been captured, the updates are stopped. If the stop button on the but-
ton bar is clicked, the updates will also stop before completion of the specified num-
ber of TISIs.
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000
The slant range from own aircraft to the intruder in nautical miles.
The intruder's altitude in feet (MSL). A series of -----'s indicates that
the intruder is non-altitude reporting (NAR).
This is an indication of the antenna on which the intruder is being
surveilled. A 'T' indicates the top antenna, while a 'B' indicates the
bottom antenna.
The measure power of the last received from the intruder. A power
of 255 indicates no reply was received from the intruder. A power of
zero indicates that a power and/or bearing could not be computed
for the intruder during the current TISI.
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 14 of 18
D-18