B
B
B
B
Failures for the current power cycle are not in the Diagnostic and Log Data, since
the Log is written at the end of each power cycle.
7.
Configuration Module Options
The user will be offered options to view the strap data, modify the strap data, save to
a text file, save to a binary file, copy from a binary file, and initialize the configuration
module.
7.1 View Strap Data
This option allows the user to view the current strap settings in an easy to read lay-
out. The TAS unit sends the data to the "Main Diagnostic Window" ( see Figure 4).
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
D-13
NOTE
Figure 4 View Strap Data Window
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 9 of 18
Rev 0, October/2000