B
B
B
B
5.2 Continuous View
On the I/O Data Menu, click Continuous View to request continuous updates of
the I/O data. Continuous mode is the single snapshot repeated every one to two
seconds. The TAS unit sends the data to the "I/O Continuous Window". A slight
screen flicker will be noticeable as each new screen of data is written. The red Stop
button on the button bar will be enabled as long as communications are on going
and the window is being updated. To stop the update, click the Stop button.
6.
Inspecting TAS Unit's Internal Diagnostic and Log Data
On the Diag Log Menu, click View Log to request the TAS unit's Internal Diagnotic
and Log Data. The TAS unit sends the data to the "Main Diagnostic Window" ( see
Figure 3).
Figure 3 Diagnostic and Log Data Window
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 8 of 18
D-12