Honeywell BENDIX KING KMH 880 System Installation Manual page 184

B
I. Airborne Headphone Volume; 1.25, 2.5, 5, 10, 20, 40, 80, 100 mw.
The airborne headphone level will be configurable to the above levels.
J. Airborne Functional Test; Inhibited or Allowed.
When the Airborne Functional Test is inhibited, the TAS Processor will
inhibit Functional Test while in the air.
When the Airborne Functional Test is allowed, the TAS Processor will allow
Functional Test in the air.
K. ATE Output; Enabled or Disabled.
The ATE Output will be used to enable the ATE lines for the Anechoic
Chamber and the RGS stations.
L. Intruder File Protocol
ARINC 735a or Honeywell Business and Commuter Aviation Systems
(BCAS) protocol.
M. Display Valid Input Usage: Used or Ignored.
If "Used" is selected, TAS will use the Display Valid Input for BITE pur-
poses. If "Ignored" is selected, TAS will ignore the Display Valid Input for
BITE purposes.
N. RS-422 Output Drivers: enabled or disabled
When the TAS processor is configured to have the Data Recorder RS-422
Drivers enabled, the RS-422 output bus shall be active. When the RS-422
Drivers are disabled the output bus shall be inactive. This should be set to
"disable" for aircraft installations.
Page 4-14 10609I00.ZIPCDL
KMH 880/KTA 870
Rev 0, October/2000