Modify Strap Data - Honeywell BENDIX KING KMH 880 System Installation Manual

Multi-hazard awareness system/traffic advisory system
Hide thumbs Also See for BENDIX KING KMH 880:
Table of Contents

Advertisement

B
B
B
B

7.2 Modify Strap Data

The strap data is read from the TAS unit and displayed in a dialog box ( see Figure
5). The dialog box has two pages, Strap Page 1 and Strap Page 2. Click on the top
of each page to view/modify the different straps. The user may modify any of the
straps by selecting the desired configuration. The selections are made using list
boxes and radio buttons. Click the down arrow on the list boxes and click the desired
configuration. For radio buttons, click the desired configuration button.
Once the user is satisfied with the strapping, click the OK button and the user will be
prompted as to whether or not to write the data to the configuration module. Click
the cancel button to exit without saving changes.
If the user opts to write the data to the configuration module, a message window will
appear informing the user that the data is being written, the TAS unit is resetting,
and the user should wait until the initialization is complete. When the TAS unit is ini-
tialized, a message will be displayed in the window. At this point the user may click
the OK button to continue.
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000
Figure 5 Modify Straps Window
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 10 of 18
D-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bendix king kta 870

Table of Contents