Tas Diag Demonstration Mode; Inspecting Current Processor I/O Data; Snapshot View - Honeywell BENDIX KING KMH 880 System Installation Manual

B B
B B

4.1 TAS Diag Demonstration Mode

The TAS Diag program contains a demonstration mode (in the file menu) which is
useful for familiarizing the user with available options. The demonstration mode
does not require an RS-232 connection to a TAS unit. Any option may be selected,
and a simulation TAS unit response will occur.
5.

Inspecting Current Processor I/O Data

There are two options for inspecting the TAS unit's I/O data: single snapshot or con-
tinuous ( see Figure 2).
Figure 2 I/O Data View Continuous Window

5.1 Snapshot View

On the I/O Data menu, click Snapshot View to request a snapshot ( one time) of
the I/O Data. The TAS unit sends the data to the "Main Diagnotic Window".
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
D-11 10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 7 of 18
Rev 0, October/2000