B
TA&D Alternate Pop Up = True disables the automatic Pop Up feature.
ID
0
1
Table 4-10 Terrain Display Alternate Pop Up Option
4.2.4
TAS Configuration Options
The TAS Processor will acquire the following hardware strap information from
the configuration module.
Format is as follows: Configuration Option; Configuration Option Description.
A.
Display Intruder Limit; 3 (Minimum) Display Intruder Limit 30 (Maximum),
incremented by 1.
The Display Intruder Limit Program is used to limit the number of intruders
displayed in the aircraft. The Display Intruder Limit will be configured to a
value between 3 (minimum FAA requirement) and 30 (max. intruder limit).
The TAS Processor will transmit a maximum of 30 intruders to the traffic display.
B.
Heading Type; Synchro Data or ARINC 429 Data
The Heading Type Program will indicate the type of heading source (either
ARINC 429 or Synchro) that interfaces to the TAS.
C.
Attitude Type; Not Installed or ARINC 429 Data.
ARINC 429 magnetic heading (BCD or Binary), pitch angle and roll are
input to the TAS Processor via the Attitude/Magnetic Heading ARINC 429
high speed input bus.
Page 4-12
TA&D ALTERNATE POP UP DISABLE
False
True
10609I00.ZIPCDL
EFFECTIVITY
-001
-001
NOTE
NOTE
KMH 880/KTA 870
-001
-001
Rev 0, October/2000