Operating Elements; Adjusting The Steering Unit; Dx2 Steering Unit - Vermeiren TRACER Instruction Manual

E
THE OPERATING ELEMENTS
The electric wheelchair is delivered fully assembled. Only the footrests have to be fixed (see the
relevant description). Your dealer delivers the wheelchair fully assembled and explains the various
operating elements and their use. However, for your own safety we provide a further, detailed
explanation of the different parts.
The steering and control unit built into your electric wheelchair enables you to control all the driving,
steering and braking processes of the vehicle. The wheelchair's electrical unit and electronics are
constantly being monitored internally. Any fault in the electronics is indicated on the steering unit and,
if necessary, the wheelchair is switched off for reasons of safety (see the chapter on fault analysis).
Consult your specialist dealer if this happens.
The TRACER model can be fitted with equipment which can electrically adjust the inclination of the
seat and the backrest, as well as the height of the footrests.

ADJUSTING THE STEERING UNIT

1
L
Make sure that the steering unit's connection cable stays clear of the pincer mechanism.

DX2 STEERING UNIT

The steering and control unit built into your electric wheelchair enables you to control all the vehicle's
driving, steering and braking processes and to control other adjusting motors (options: lifting column
and seat/back adjuster and leg supports). The wheelchair's electrical unit and electronics are
constantly being monitored internally. Any fault in the electronics is indicated on the operating display
(6) and the status display (1) and, if necessary, the wheelchair may be switched off for reasons of
safety (see the chapter on fault analysis).
3
7
8
2
4
6
1
10
9
5
The steering unit's horizontal position can be changed
by loosening screw (1). The unit can then be adjusted
as desired, or removed. Screw (1) must then be
retightened properly. If screw (1) is pulled to the side,
the steering unit can be turned to the side.
1 = Display (colour)
2 = "ON / OFF" button
3 = "LEFT INDICATOR" + "LIGHT" button
4 = "RIGHT INDICATOR" + "WARNING INDICATOR" button
5 = "HORN" button
6 = Fault code/operating display
7 = Brightness sensor
8 = "DRIVE PROFILE" button
9 = "SELECT FIELD" button
10 = "SELECT MENU" button
4
TRACER
01/2010