To support you on the installation and repairs of this electric wheelchair, we provide you with this installation manual. Please read it carefully. If you still have questions after reading this manual, do not hesitate to contact Vermeiren. The information in this manual applies to the following wheelchair(s): ...
Timix 2021-05 Scope of delivery Scope of delivery The following items are part of the delivery: Framework with armrests, operator control, rear and front wheels, seat and backrest (optional: electrically adjustable seat, backrest, electrical lift) Footrests (*) ...
Read the user manual of this wheelchair. Be aware of the technical details and limits of intended use; see the user manual. For more information, contact Vermeiren. Tools To (dis)assemble and adjust the wheelchair, the following tools are needed: ...
Timix 2021-05 Assembly and adjustments Adjusting the wheelchair to the user 3.2.1 Seat depth The seat is adjustable in 6 different seat depth settings: 1. Loosen the two M6 socket screws (1) on either side of the frame. 2. Slide seat frame (2) backwards or forwards to get the desired position.
Timix 2021-05 Content 3.2.3 Width between armrests Risk of injuries CAUTION The maximum width is indicated by two triangles on each side of the seat, see picture. The outer triangles may not be covered by the frame tube. To adjust the width of the armrests: 1.
Timix 2021-05 Assembly and adjustments 3.2.5 Armrest lowest and highest angular position Risk of injuries CAUTION Always use two socket bolts and two adjustment holes to tighten the armrest. Never exceed the maximum angular adjustment (holes). To change the end position of the turning angle: Hold the armrest and remove the two socket screws (35).
Timix 2021-05 Content 3.2.8 Leg rests BZ7/BZ8 adjustments Leg rest length Risk of injuries or damage CAUTION The maximum length of the footrest is limited to the length indicated by a triangle on the front of the footrest tube, see picture. This maximum length adjustment is not possible in sitting position;...
Timix 2021-05 Assembly and adjustments Calfrest depth 1. Loosen the socket screw (31) on the calfrest support (32). 2. Adjust the depth of the calfrest to a comfortable position (7 positions available). 3. Retighten the socket screw (31). 4. Repeat for the second calfrest. Make sure that the calfrests are positioned identically.
1. Take off the rear battery cover by removing the knobs on the top and bottom. You can now reach the batteries. Replace both batteries at the same time and with the same type as the ones used in the wheelchair. If this is not possible, contact the nearest Vermeiren facility. Battery connections: 1) Blow fuse...
Timix 2021-05 Assembly and adjustments Changing wheels or tyres Risk of injuries and damage CAUTION Make sure that all air is released from the tyre, before removing it. Use a wooden block and jack to lift the wheelchair. Always place the jack under the lower frame, never under any other parts.
Timix 2021-05 Content 3.4.2 Steering wheels (Rear wheels) DISMANTLING A. Loosen the screw on the steering wheel axle and remove it from the steering wheel fork. B. Let the air out of the steering wheel by lightly pressing the pressure pin on the valve.
Need help?
Do you have a question about the Timix and is the answer not in the manual?
Questions and answers