Save & Exit Setup; Exit Withou Saving - Shuttle FT20 User Manual

@
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Pressing "Y" stores the selections made in the menus of CMOS - a special
section of memory that stays on after you turn your system off. The next
time you boot your computer, the BIOS configures your system accord-
ing to the Setup selections stored in CMOS. After saving the values the
system is restarted again.
@
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
This allows you to exit from Setup without storing in CMOS any change.
The previous selections remain in effect. This exits from the Setup utility
and restarts your computer.
Save to CMOS and EXIT (Y/N)? Y
Quit without saving (Y/N)? Y
- 76 -