Shuttle FT20 User Manual page 72

WakeUp\PowerOn by PCI Card
The item allows you to enabled or disabled the WakeUp\PowerOn by
PCI Card.
Ø The choice: Enabled or Disabled.
USB Dev WakeUp
If you are using a USB keyboard, and the ACPI suspend type is set to S3,
you can enable this item to allow a keystroke to wake up the system from
power saving mode.
Ø The choice: Enabled or Disabled.
Resume by Alarm
When set to Enabled, the following three fields become available and
you can set the month, date (day of the month), hour, minute and second
to turn on your system.
Ø The choice: Enabled or Disabled.
Date(of Month) Alarm
This item selects the alarm Day of Month.
Ø The choice: 0~31.
Time(hh:mm:ss) Alarm
This item selects the alarm Time.
[hh] Ø Key in a DEC number: Min=0, Max=23.
[mm/ss] Ø Key in a DEC number: Min=0, Max=59.
PS2 Keyboard Wake Up
When the Wake Up Function is set to PS2 Keyboard, use this item to set
the PS2 keyboard combination that turns on the system.
Ø The choice: Disabled, Password or Hot KEY.
KB Wakeup Password
When the Wake Up Function is set to Password, use this item to set the
password.
Ø The choice: Enter.
- 67 -