Shuttle FT20 User Manual page 14

- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Sus-
pend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving
Features controlled by your operating system that supports OS Direct Power
Management (OSPM) functionality.
- System BIOS
Provides licensed Award BIOS V6.0 PG on 4Mb Flash core and supports Green
PC, Desktop Management Interface (DMI).
- Form Factor
System board conforms to Small form factor ATX specification.
Board dimension: 254mm X185mm.
- Advanced Features
Ø Low EMI - Built in spread spectrum and automatic clock shut-off of unused
PCI/SDRAMS slots to reduce EMI.
Ø Dual Function Power Button - The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode. When
the power button is pressed for longer than 4 seconds, the system enters Soft-
Off mode.
Ø Wake-on-LAN (WOL) - The onboard WOL connector can be attached to
a network card that supports this function to wake up the system via LAN.
Ø Thermtrip - The system provides a hardware - enforced thermal protection
mechanism. When the processor's die temperature exceeds a specified tem-
perature, the system will auto - power off and thermtrip LED is bright.
Ø Frequency/Voltage Control - This item allows users to adjust CPU Host
Clock, and Voltage in BIOS.
- Intelligent Features
Ø Voltage Monitoring - Monitors various voltages of key elements, such as
the CPU, and other critical system voltage levels to ensure stable current
passing through mainboard components.
Ø Fan Status Monitoring - To prevent CPU from overheating, the CPU fan
is monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is
required.)
Ø Temperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.
- 9 -