Pnp/Pci Configuration - Shuttle FT20 User Manual

@
PnP/PCI Configurations
This section describes the configuration of PCI bus system. PCI or Pers-
onal Computer Interconnection is a system which allows I/O devices to
operate at the speed CPU itself keeps when CPU communicating with its
own special components. This section covers some very technical items,
and it is strongly recommended that only experienced users should make
any changes to the default settings.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit from Setup if you have
installed a new device or software and the system reconfiguration has
caused such a serious conflict that the operating system can not boot.
Ø The choice: Enabled or Disabled .
Resources Controlled By
The Award Plug-and-Play BIOS has the capacity to automatically config-
ure all of the boot and Plug-and-Play compatible devices. However, this
capability means absolutely nothing unless you are using a Plug-and-Play
operating system such as Windows 95.
If you set this field to "manual" , choose specific resources by going into
each of the sub-menu that follows this field (a sub-menu is proceeded
by a ">").
Ø The choice: Auto(ESCD) or Manual.
- 69 -