Shuttle FT20 User Manual page 68

and you have USB peripherals.
Ø The Choice: Enabled or Disabled.
High Definition Audio
This item allows you to enable/disable the High Definition Audio.
Ø The Choice: Enabled or Disabled.
Serial ATA Controller
This item allows you to enable/disable the Serial ATA Controller.
Ø The Choice: Enabled or Disabled.
Serial ATA RAID Mode
This item allows you to enable/disable the Serial ATA RAID Mode.
Ø The Choice: Disabled, or Enabled.
Super I/O Setting
Press <Enter> to enter the sub-menu of detailed options.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) in-
stalled on the system board and you want to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field.
Ø The Choice: Enabled or Disabled.
Onboard Parallel Port
This item allows you to determine onbaord parallet port controller I/O
address setting.
Ø The Choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 or Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel(printer) port. Select
Normal,Compatible, or SPP unless you are certain your hardware and
software both support one of the other avaukable modes.
Ø The Choice: SPP, EPP, ECP or ECP + EPP.
- 63 -