Shuttle FT20 User Manual page 13

- 8 USB 1.1/2.0 Compliant Interface Onboard
Ø Supports up to 8 USB ports. Supports USB 2.0/1.1 compliant.
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1 x VGA Port.
Ø 1 x DVI Port.
Ø 1 x 1394 Port.
Ø 1 x PS/2 Keyboard Port.
Ø 1 x PS/2 Mouse Port.
Ø 1 x 10/100/100 LAN Port.
Ø 2 x USB 1.1/2.0 Ports.
Ø 1 x Line-In Port.
Ø 1 x Side-SURR Port.
Ø 1 x Center/Bass Port.
Ø 1 x Surround-Back Port.
Ø 1 x Front-Out Port.
Ø 1 x Clear CMOS Button.
- PCI Bus Master IDE Controller Onboard
One Ultra DMA 133 Bus Master Dual-channel IDE ports provide support to a
maximum of two IDE devices (one Master and one Slave per channel). The IDE
Bus implements data transfer speeds of up to 133/100/66/33 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin standard ATX
power connectors, supporting Suspend and Soft-On/Off by dual-function power
button. One 4-pin 12V ATX power connector.
- 8 -