Part 4: How To Use; Operation Guideline - Modena Conesso Series User Manual Book

• Check all the plumbing (piping) connections to early detect leakage
before turning on this electric storage water heater.
• Make sure that the tank has been fully filled up with water;
otherwise it can cause the heating elements to be damaged.
• The water heater needs to be turned on for certain period of time
to reach the desired temperature.
• During the heating process, it is normal to see a bit of drip from the
safety valve. Do not cover the safety valve outlet hole.
• Connect the water outlet hole to a drainage pipe. Water may drip
from the safety valve of the drainage pipe of; therefore, this pipe
must be exposed to the atmosphere (air).
• The safety valve needs to be operated regularly (preferably at
least every six months) to remove the limestone deposit and to
ensure that it is not blocked.
Operation Guidelines
Temperature Setting: press
•
temperature scale ranging from 30-75°C.
• Time Setting: Long press
time. When the hour clock is flashing then press
hour data. Re-press
automatically if there is no operation in 5s.
• Standard Heating: the water heater will be in the full working cycle
to keep the hot water at the set temperature for 24 hours.
Heating Timer: the water heater will ensure a hot water supply
•
with the set temperature at the required time
• Wi-Fi Controller: users can install the customized Apps (IOS or
Android version) on smart-phone; connect to Wi-Fi or cellular data
(3G/4G) to control the water heater.
• Remote control configuration: turn on the water heater within 15s;
press
heater will beeps if the configuration is successful.

PART 4: HOW TO USE

to set the minute data. System will quit
buttons to enter configuration; then, the water
buttons to adjust the
button for over 2s to set the clock
.
8
to set the