Cvt Cover - Can-Am MAVERICK Sport MAX Series Operator's Manual

MAINTENANCE PROCEDURES
219002003-017
FRONT SPARK PLUG
The rear cylinder is accessible from the
RH wheel well.
219001880-041_a
1. Rear spark plug
Spark Plug Removal
Unplug spark plug cable.
219001880-041_a
1. Spark plug
______________
114
219002003-017
FRONT SPARK PLUG
Clean spark plug area with pressurized
air before removing spark plug.
Unscrew spark plug completely using
a spark plug socket, then remove it.
Spark Plug Installation
Prior to installation make sure that con-
tact surface of cylinder head and spark
plug is free of grime.
Using a feeler gauge, set the spark plug
gap.
SPARK PLUG GAP
0.8 mm to 0.9 mm (.031 in to .035 in)
Apply a small amount of copper-based
anti-seize lubricant over spark plug
threads.
Screw spark plug into cylinder heads
by hand and tighten with a torque
wrench and a proper socket.
NOTICE
Do not overtighten spark
plugs, engine damage can occur.
TIGHTENING TORQUE
Spark plug

CVT Cover

NOTE: For a better understanding,
some illustrations are taken with en-
gine out of vehicle. To perform the
following instructions, it is not neces-
sary to remove engine.
11 N•m (97 lbf•in)