Can-Am MAVERICK Sport MAX Series Operator's Manual page 18

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
Accelerator pedal
Brake pedal
Fuel level
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
Ignition switch
Shift lever
2WD/4WD selector
Brakes
_______
16
INSPECTION TO PERFORM
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Check the fuel level.
INSPECTION TO PERFORM
Check if steering wheel operates freely by completely
turning it from side to side.
Turn the ignition switch to OFF to verify if engine will shut
down. Restart engine.
Check operation of shift lever (P, R, N, H and L).
Check operation of 2WD/4WD selector.
Drive forward slowly a short distance and apply brakes.
The brake pedal must feel firm when applied. The pedal
must return to rest position when released. The brakes
must respond adequately to the driver's input.
SAFETY INFORMATION
________
✔
✔