Can-Am MAVERICK Sport MAX Series Operator's Manual page 125

TIGHTENING TORQUE
Elastic flange
nut M12
219002126-018
PARTS REMOVED FOR CLARITY - FRONT
SHOCK ABSORBER FASTENERS
219002126-015
REAR SHOCK ABSORBER FASTENERS
Front Suspension Arms
Check suspension arms for cracks,
bending or other damages.
Tighten front a-arms to specifications.
TIGHTENING TORQUE
M12 bolt
NOTE: The suspension arms must be
tightened on the M12 bolt head and not
on the nut (when possible) to insure op-
timal clamping.
74.5 N•m ± 4.5 N•m
(55 lbf•ft ± 3 lbf•ft)
112 N•m ± 7.5 N•m
(83 lbf•ft ± 6 lbf•ft)
219002130-002
Rear Suspension Arms
Check suspension arms for distortion,
cracks or bending.
Tighten at ride height to specifications.
M12 bolt
Hexagonal
flanged elastic
nut M10
NOTE: The suspension arms must be
tightened on the M12 bolt head and not
on the nut (when possible) to insure op-
timal clamping.
219002126-019
1. M12 bolt
2. Hexagonal flanged elastic nut M10
______________
MAINTENANCE PROCEDURES
TIGHTENING TORQUE
130 N•m ± 10 N•m
(96 lbf•ft ± 7 lbf•ft)
90 N•m ± 10 N•m
(66 lbf•ft ± 7 lbf•ft)
123