Placing An Original On The Exposure Glass - Ricoh IM C530 Series User Manual

Placing an Original on the Exposure Glass

Use the exposure glass to scan originals that cannot be placed in the auto document feeder (ADF), such
as books and license cards.
• When lowering the ADF, do not place your hands on the hinges and exposure glass. Your
hands or fingers are caught, which can result in injury.
• Do not lift the ADF forcefully. The cover of the ADF might open and cause injury. The ADF, or its
hinges may also become damaged.
1. Lift the ADF.
2. Place the original face down and aligned to the mark on the upper left corner of the scan
area.
page 174 "Recommended Original Size and Weight"
3. Lower the ADF.
• You can set a book or object that is less than 20 mm (0.79 inches) thick. A book or object that is
thicker than 20 mm (0.79 inches) cannot be set.
• When you place a thick book or three-dimensional original on the exposure glass and lower the
ADF, the back side of the ADF rises up to accommodate the original.
D0CSIA1209
Placing an Original on the Exposure Glass
49