Adding Paper And Toner; Loading Paper Into The Paper Tray - Ricoh IM C530 Series User Manual

7. Adding Paper and Toner

Loading Paper into the Paper Tray

The method of loading paper varies for each tray type.
• When replacing paper or removing jammed paper, make sure not to trap or injure your fingers.
• If the first layer paper tray is installed, do not pull out more than one tray at a time. Pressing
down forcefully on the machine's upper surface might cause the machine topple over, possibly
resulting in injury.
• Do not pull out paper trays while printing. Doing so can cause a paper jam.
Bypass Tray
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
• Before loading paper into a tray, check the paper size and type that can be loaded in the tray,
and confirm the paper size that is automatically detected.
page 162 "Recommended Paper Sizes and Types"
• When loading paper of a size that is not automatically detected, specify the paper size in [Tray/
Paper Settings] of [Settings].
See "Tray/Paper Settings", User Guide (Full Version).
• Check the paper setting before printing. If the paper differs from the paper setting, a mismatch error
will occur when you print.
Large Capacity
Tray (LCT)
D0CSIA1215
149