Ricoh IM C530 Series User Manual page 215

Message
"Information for user In LDAP
authentication is authentication
already registered (Custom
for another user." authentication), the
same name is
registered under
different IDs on
different servers,
and duplicate
names (account
names) occurred
such as when
switching the
domain (server).
"Insufficient The amount of
Memory" available memory is
insufficient.
"Load following The paper tray
paper in XXX. To specified in the
force print, select printer driver has no
another tray and paper loaded.
press [Continue]."
(XXX indicates the
tray name)
When a Message Appears While Using the Printer Function
Cause
• Consult the user administrator. User administrator:
Delete the corresponding user from the address
book, and register the user again after resolving
the duplicate names on different servers.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
• To proceed with printing after changing the paper
setting, select a tray and press [Continue].
However, when Staple is specified, or when
Duplex printing is specified on a paper tray that
does not support the function, printing cannot be
performed. When Sort is specified, only one copy
of the document is printed.
• To proceed with printing on the specified paper,
load the paper in the tray.
page 149 "Loading Paper into the Paper Tray"
Solution and reference
213