Table of Contents
Advertisement
Dispatching with the FRED® handheld throttle & Support
7. Dispatching with the FRED® handheld throttle
The FRED® handheld throttle, which is particularly popular in
the FREMO group, requires a slightly different procedure. Here
the desired address must be assigned from the command
station: due to its simple construction a locomotive can be
directly selected. Use the so called "Dispatching" feature: the
locomotive to be controlled with a FRED® throttle must first
be assigned by the command station to the "Dispatch Slot".
The FRED® throttle then will take over this locomotive if so
desired.
Dispatching is quite easy with the ECoS:
• First select the locomotive to be assigned to a FRED® throttle with
one of the two throttles of the ECoS.
• Now release this locomotive on the ECoS by selecting "Release
Throttle" in the context menu (also refer to Fig. 12).
Figure 12: Release controller
• The locomotive that has been released last is now saved in the
"Dispatch Slot".
• Now take over the locomotive with the FRED® throttle as descri-
bed in the FRED® manual.
If more "fully-fledged" throttles are connected to the L.Net con-
verter you may also use these throttles for "Dispatching".
10
8. Support and Assistance
Your model train dealer or hobby shop is your competent partner
for all questions regarding your LokPilot decoder. Otherwise please
use either email, fax (please provide your fax-no./email address) or
go to www.esu.eu/en/forum and we will reply within a few days.
USA & Canada (English support), please contact:
Phone:
+1 (570) 649-5048
Tuesday & Thursday 9:00am - 3:00pm (CT)
Fax:
+1 (866) 591-6440
Email:
support@loksound.com
Mail:
ESU LLC
477 Knopp Drive
US-PA-17756 Muncy
Germany and all other countries, please contact:
Fax:
++49 (0) 731 - 1 84 78 - 299
Email:
www.esu.eu/en/forum
Mail:
ESU GmbH & Co. KG
Edisonallee 29
D-89231 Neu-Ulm
www.esu.eu
Copyright 1998 - 2012 by ESU electronic solutions ulm GmbH & Co KG. Mis-
takes, changes resulting in technical advancement, availability and all other rights
reserved. Electrical and mechanical characteristics, dimensions and sketches are
subject to change without prior notice. ESU may not be held responsible for any
damage or consequential loss or damage caused by inappropriate use of the pro-
duct, abnormal operating conditions, unauthorised modifications to the product,
etc. Not suitable for children under 14 years of age. Inappropriate use may result
in injury due to sharp points and edges.
Märklin® is a registered trademark of Gebr. Märklin® und Cie. GmbH, Göppin-
gen, Germany. RailCom® is a registered trademark of Lenz Elektronik GmbH,
Giessen. RailComPlus® is a registered trademark of Lenz Elektronik GmbH, Gies-
sen. All other trademarks are the property of their respective legal owners.
According to its policy ESU electronic solutions ulm GmbH & Co KG continues to
develop its products. Therefore ESU reserves the right to implement changes and
improvements to any of the products listed in the ESU documentation.
Duplication and preproduction of this documentation in any shape or form re-
quires prior written consent from ESU.
Advertisement
Table of Contents
