Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T Manual page 8

62.1
G
the middle section of the car body 61A, attached to the
et
last issue, and join it to the rear section 62A, as shown in the
illustration.
62A
QM
QM
62A
QM
61A
62.2
246
STAGE 62
61A
A USEFUL TIP
When joining metal parts, such as those of the
car body, self-tapping screws are used. If you
encounter any difficulty screwing them into the
hole, take the screw out and remove any burrs
that may be stopping it from entering.
Sometimes it's enough to unscrew it a quarter
turn, and then start screwing again.
t
uRn the pieces upside down and attach
them to the car body (61A and 62A) with
three type QM screws.