Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
IPv4 Settings
Provision
Obtain DNS Servers
Automatically or Configure DNS
Servers Manually
IPv4/Subnet Mask
Gateway
Primary DNS
Secondary DNS
IPv6 Settings
Provision
Obtain DNS Servers
Automatically or Configure DNS
Servers Manually
IPv6 Address/Prefix Length
Select either Dynamic IP (DHCP) or Static IP Address:
DHCP automates the assignment of IP addresses,
subnet masks, default gateways and other settings.
On the other hand, Static IP addressing scheme
requires you to enter IP addresses, subnet masks,
default gateways and other settings manually.
If DHCP is selected, choose to either obtain DNS
server settings automatically or enter them manually.
If Static IP Address is selected, assign an IPv4 address
and the subnet mask, which are used for networked
devices to communicate and determine the subnet of
the IP address respectively.
If Static IP Address is selected, enter the gateway IP
address. This is the address of a router interface
connected to the Hub that forwards packets out to
another subnet or network.
Enter the IP address of a DNS server.
Enter the IP address of a DNS server as a backup if the
primary DNS server fails.
Select Static IPv6 Address, IPv6 Auto Configuration or
Local Connectivity Only.
DHCP automates the assignment of IP addresses,
subnet masks, default gateways, and other settings.
On the other hand, Static IP address scheme requires
you to enter IP addresses, subnet masks, default
gateways and other settings manually. Select Local
Connectivity Only to use the link-local address of the
device for the local network.
If Auto Configuration is selected, choose to either
obtain DNS server settings automatically or enter
them manually.
Enter the IPv6 address and prefix length. The prefix is
used to identify the IPv6 network. The valid range is 1-
128.
22
System Settings
Advertisement
Table of Contents
