Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Troubleshooting
The Troubleshooting section provides methods for overcoming problems and fundamental
operation information.
The Live View is not working if it is accessed from the Safari browser on
macOS using IPv6.
Here are some tips to help you solve disconnected Live View.
Use IPv4 addressing method
This problem occurs only with cameras using IPv6 address scheme. Connect to a
camera using an IPv4 address instead.
Enable "NSURLSession Websocket"
To enable NSURLSession WebSocket:
Make sure that your Safari version is 14.0 and above. (Go to Safari > About Safari.)
1.
2.
Open the Safari® browser. Choose Safari > Preferences, click Advanced, then select
Show Develop menu in menu bar.
3.
Choose Safari > Develop in the menu bar, then select Experimental Features and
click NSURLSession WebSocket to enable it.
What is the storage requirement for DNH-200?
The DNH-200 supports the installation of one 2.5-inch solid-state drive (SSD) or
Hard disk drive (HDD) with at least 128GB capacity. Running continuous video
recording for a long time may impact SSD's lifetime. Please consider using an HDD
for video recording instead.
Please refer to DNH-200 HDD compatibility list from the D-Link web site in your
region.
141
Troubleshooting
Advertisement
Table of Contents
