Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Wireless
Wireless Mode
Data Rate
Beacon Interval
DTIM Interval (1-15)
WMM (Wi-Fi Multimedia)
ACK Timeout (64~200)
Short GI
IGMP Snooping
Multicast Rate
Multicast Bandwidth
Maximum Multicast
Bandwidth
HT20/40 Coexistence
Change DHCPOFFER from
Broadcast to Unicast
Turn on or off the wireless band for the network.
Select the wireless mode used for the network. For
5GHz, Mixed 802.11n/a, 802.11a Only, 802.11n Only,
and Mixed 802.11ax/ac/n/a are available. For 2.4GHz,
Mixed 802.11ax/n/g/b, Mixed 802.11g/b, and 802.11n
Only.
Select the wireless data rate.
Enter the beacon interval value. The default value is
100.
Enter the Delivery Traffic Indication Message (DTIM)
interval value. The default value is 1.
Enable or disable Wi-Fi Multimedia.
Enter the ACK timeout value. The default value is 64
microseconds
Enable or disable short GI.
Enable or disable the IGMP snooping
Select the multicast rate value.
Control
Enable or disable bandwidth limit for multicast. This
setting will be automatically applied to other band
frequencies.
If the Multicast Bandwidth Control is Enabled, enter
the maximum multicast bandwidth value. The default
value is 100 kbps.
Enable or disable the HT20/40 coexistence function.
Enable or disable the change of packet type of DHCP
offering to unicast. This setting will be automatically
.
70
AP Network
Advertisement
Table of Contents
