Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Accounting Mode
Accounting Server/Port/Secret
Note: Once the settings are updated, the configuration must be uploaded to the access
points. See Create Profile in the previous section for further information.
In the Access Control Section, the following parameters can be configured:
Action
MAC Address
Upload MAC Address List
IP Filter Settings
IP Address/ Subnet Mask
In the User Authentication section, the following parameters can be configured:
Authentication Type
Session/Idle Timeout
(2~1440)
Enable Simultaneous Login
Allow
(1~720) times
is only available when Security is WPA-Enterprise or
802.1X. Enter the server's IP address, port number
and secret.
Enable or disable the use of an accounting server.
The RADIUS Server uses an accounting server as a
management system to manage users who use a
network service. Enter the accounting server's IP
address, port number and secret.
Select the action to be applied to the clients: Accept
or Reject.
Enter the MAC address of the clients that will be allowed
or denied access and click Add. The maximum number of
entries allowed is 512.
Click Browser... to select the MAC address file, located on
the local computer, that will be uploaded. Click Upload to
update the MAC address list. Click Download to
download the current MAC address list. The MAC address
list has to be a line break delimited txt file.
Enable or disable IP Filtering. The maximum number of
entries allowed is 64.
Enter the IP address and subnet mask of the clients to
which the allow/deny list should be applied.
Select the authentication type to be applied to the
wireless clients: Disabled, Web Redirection Only,
Username/Password, Remote RADIUS, LDAP, POP3,
Passcode, External Captive Portal, MAC Address, Click
Through, or Social Login.
Enter the session/idle timeout value.
Check to enable simultaneous login.
Limit the number of login times per day.
57
AP Network
Advertisement
Table of Contents
