D-Link Nuclias Connect Hub Plus DNH-200 User Manual page 66

Nuclias Connect Hub Plus User Manual
Uplink Speed
Add
Clear
Click Save to save the values and update the screen.
Once the settings are updated, the configuration must be uploaded to the access points. See
Profile Settings for more information.
RF Optimization
The RF Optimization page displays the configurable Radio Frequency (RF) settings for the
access points of the wireless network. Navigate to Configuration > Profile Settings > [Site] >
[Network] > RF Optimization to view existing settings.
Adjust Frequency
Auto Channel Adjustment
Auto Power Adjustment
Click Save to save the values and update the screen.
Once the settings are updated, the configuration must be uploaded to the access points. See
Profile Settings for more information.
specified SSID depending on the rule type.
Enter the uplink speed assigned to each station or the
specified SSID depending on the rule type.
Click Add to add the rule for the network with the
designated radio frequency into the Bandwidth
Optimization Rules.
Click Clear to clear the entered rule.
Set the rate in hours at
adjusted.
Enable the function to automatically adjust the channel
of the client to avoid RF interference.
Available if Auto Channel Adjustment is enabled. Enable
the feature to automatically adjust AP radio power to
optimize coverage when interference is present.
66
which the RF frequency is
AP Network