Date And Time - D-Link Nuclias Connect Hub Plus DNH-200 User Manual

Nuclias Connect Hub Plus User Manual
Click Save to save the values and update the screen.
In the Console Settings section, parameters for data communication through the console
port of the DNH-200 can be configured:
Console
Console Protocol
Timeout
Click Save to save the values and update the screen.

Date and Time

Setting the time is essential for proper maintenance and troubleshooting of a network device
by checking system logs and alerts.
settings.
You can configure the time zone, adjust for daylight saving time, and configure the Network
Time Protocol (NTP) server to synchronize the date and time with a time server.
Configure the date and time and NTP server settings with the following parameters:
Time Zone & City Name
Enable Daylight Saving
DST Offset
DST Start (24HR)
(the CAPTCHA code) in the login screen.
Check to enable management through the console port.
Choose whether to use Telnet or SSH as the terminal emulator.
Click the drop-down menu to select timeout in minutes: 5 minutes or
Never.
Navigate to Settings > Date and Time to configure these
Select the time zone.
Enable the daylight saving function.
Select Daylight Saving Time (DST) Offset time.
Designate the start date and time for DST.
20
System Settings