Nuclias Connect Hub Plus User Manual
* Normal speed = 1 second On, 1 second Off
Interface Connectors
#
Connector
1
Console Port
2
Ethernet Port
3
USB Port
4
Reset
Description
RJ-45 port to connect the RJ-45 connector of a serial-to-RJ-45
console cable for CLI management.
Gigabit RJ-45 port for LAN connection.
USB 2.0 supports flash drive for video export and configuration
backup.
Device Reboot
Press the Reset button once to reboot the DNH-200.
Reset to Factory Default
Hold the Reset button for 5 seconds; all LEDs will turn on
at the same time. After 1 second, all the LEDs will turn off and
the DNH-200 will reboot and reset back to factory defaults.
Recovery
Press and hold the Reset button and then turn on the power. It
will enter the Recovery Mode for the firmware recovery
process.
8
Hardware Installation
(SSO) account.