Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Profile Settings for more information.
Device Settings
The Device Settings page allows you to view and configure the login and accessibility settings
for access points in this network.
Navigate to Configuration > Profile Settings > [Site] > [Network] > Device Setting to view
existing settings.
Username
Password
Console Settings
Enable
Console Protocol
Time Out
LED Settings
Status
Social Login Setting
Profile Settings > SSID for User Authentication using social login.
Refer to
Facebook Client/Secret ID
Enter the administrative username that is used to
access configuration settings for all access points on the
network. Do not use special characters such as %, !, and #.
Enter the administrative password that is used to access
configuration settings for all access points on the network.
The password must be 8-30 characters and contain both
lowercase or uppercase alphabetic characters and
numbers.
Check the box to enable the console function.
Select the console protocol that is applied to all access
points on the network: Telnet or SSH.
Select the active console session time-out value in
minutes.
Turns LED indicator on or off.
If using Facebook Sign-in method, enter the client and
secret ID.
68
AP Network
Advertisement
Table of Contents
