Vision REVO Product User Manual page 81

Move out of CBMS, pay attention to the weight of CBMS.
Figure 14.13 move out of CBMS
Noted:
1)The tools used by installation and commissioning personnel must have insulation
protection.
2) During installation, debugging and maintenance, you must wear insulated rubber
gloves, goggles and insulated rubber boots as appropriate to avoid safety accidents as
much as possible.
3) When maintenance is required, the main circuit breaker of the CBMS must be
disconnected, and the connection between the battery pack and the PCS/UPS DC bus
must be cut off.
81