Vision REVO Product User Manual page 36

should be connected separately, and after the self-checking is
successful, confirm that each battery cabinet is normal, then connect
to the UPS.

output cables connect for parallels(battery-busbar-UPS)
Step 4.
Figure 10.6 power cable connect for parallels

GBMS 24V power connection
Step 5.
Integrated GBMS has been introduced in section 6.2.
The GBMS power supply cable is connected from CBMS(dc24v-out) to GBMS (dc24v-in) .
Pay attention to the sequence of 24V positive and negative poles to avoid the risk of
burning GBMS, and make sure to tighten the wire with Slotted screwdriver.
36