Vision REVO Product User Manual page 58

Table 12.1 monitor software overview
item Designation
1 Navigation area
2 Overall monitoring area of
the system
3 Module information area
4 Device information
5 Warning /Protection status
6 MCB, contactor status
7 Module status area
12.2.3 BMS parameter setting
Click BMS parameter Settings in the software navigation area
parameter ,battery parameter ,single cells parameter and temperature .
Description
Display monitoring software different monitoring
Settings functional area
Displays the current running state of the
system
Display the system module state, temperature
voltage state
Display product model, software version, etc
Displays current warning and protection
status information
Displays the current system's self-check
status, circuit breaker and contactor on and off
status
Display module voltage, temperature,
communication status information
,the system
58
1