Vision REVO Product User Manual page 60

4 temperature
parameter
5 Others
When the product leaves the factory, the parameters are set by
default to ensure the system safe operation of the system. If you need
to modify, please contact our technical staff for assistance
12.3 HMI monitoring
12.3.1 Product specifications
Figure 12.1 BMS parameter overview
12.3.2 Performance
Table 12.3 GBMS performance specification
Item
1 Communication interface with CBMS
2 Communication interface with UPS
Used for setting the protection value of charging and
discharging at high temperature and low temperature
Used for setting fan control parameters, parallel voltage
parameters, etc
Designation description
CAN/RS485
CAN/RS485
60