12.2
Monitor software
12.2.1 monitor
The monitor software is a battery monitoring system running on the PC, please refer to the
following steps ,
Set the IP address of the
Step
1:
Subnet mask
Default gateway
Preferred DNS server
connect the laptop with the router with the network cable, refer to the figure in
Step
2:
section 7.2.
open the monitor software
Step
3:
click the top left corner of the software to find the device, and the IP address of
Step
4:
the device appears in the device list. After selecting the IP address, click the start
monitoring button to implement monitoring.
Note:regarding the APP ,EMEA is not available now
software connection
that means click here.
laptop, set as follows:
IP address
192.168.0.110
255.255.255.0
192.168.0.1
192.168.0.1
55