Vision REVO Product User Manual page 50

Cell under voltage
Charging high
temperature
Discharge of high
temperature
CBMS Fault
Power on system
Self-checking
failure self-check
than the minimum voltage
set value
Module temperature is
higher than the maximum
charging temperature
The module temperature is
higher than the maximum
discharge temperature
Parallel communication fault
Internal communication
failure
protection voltage, and check the protection
parameter setting through LCD or VISION
APP; If it is confirmed that the setting
parameters are reasonable and the single
undervoltage protection fault occurs
prematurely, please contact with Vision .
Please check whether the charging time of
the system is reasonable after the discharge;
If reasonable, after the system is completely
cut off, overhaul the module and overhaul the
cooling fan
Please check whether the maximum set
discharge protection temperature of the
battery are reasonable and check the setting
of protection parameters through LCD or
VISION APP. If reasonable, after the system
is completely cut off, overhaul the module
and overhaul the cooling fan
Please check whether the network cable
connected by CBMS is loose or correctly
connected. If the connection is normal and
communication is still abnormal, please
contact Vision
Failure of communication between modules,
maintenance of modules after complete
power cut off
50