Vision REVO Product User Manual page 65

12.3.6 Parameter setting page
After clicking the icon
login box to enter the parameter setting page. Currently, it only supports setting the
parameters of GBMS itself,GBMS needs to set the rated capacity of the system, the
number of modules in a single cabinet, the number of battery strings in the module, the
number of temperatures in the module, and the number of CBMS that need to be managed
Table 12.6 GBMS parameter setting overview
Ite Name
m
1 Rated capacity
2 Module Num
3 Cell In Module
4 Temp sensor in
Module
5 CBMS Num
6 Redundant Num
7 Intermittent
Charging
on the homepage, enter the password: 8888 in the pop-up
Description
The total parallel capacity of the entire system
Number of modules connected in series
Number of batteries in series in the module
Number of temperature sensors in the module
CBMS parallel number of the system
Number of battery rack redundancy
System recharge time, the default is 28 days, usually shown as
reset D1 dry contact
65