Vision REVO Product User Manual page 67


Step 3
The IP address of the Laptop/computer's wired network card is set as follows:
Table 13.2 IP address of the Laptop setting

Step 4
Disable the computer's wireless network card (if it's a laptop). Open BMS_Upgrade_Tool.exe.
As shown in the figure below, confirm that the server IP is the IP of the wired network card. Then
click the "Start Service" and
1
select the firmware to be upgraded (suffix is
Figure 13.1 Connect LAN between BMS and laptop
IP address
Subnet mask
Default gateway
Preferred DNS
server
"Find Device" buttons in turn, and click the
2
).
.bin
192.168.
0.110
255.255.
255.0
192.168.
0.1
192.168.
0.1
"Select File" button to
3
1 2
3
67