Start Up; Troubleshooting And Maintenance; Led Display Fault - Vision REVO Product User Manual

 If the battery is in the charging and discharging working state and the SOC does
not change, please contact the manufacturer
11.1.3 Start up steps
When lithium battery system is in normal operation, it is controlled
by BMS intelligently without manual interference or control.When
the lithium battery cabinet is in normal operation, the cabinet door
should be locked tightly and the key of the cabinet door should be
pulled out.
According to different on-site installation conditions, please refer to the
following flowchart when starting up
11.2

Troubleshooting and maintenance

11.2.1 LED Display Fault

Table 11.1 LED fault
LED status
Breaker on the indicator light
is off
Status indicator light is off
Remarks
If the light is off, it means that the breaker has been off or
disconnected, and the CBMS has not received high voltage power
supply, please check whether there is any abnormality in the
electrical connection of the system, and try to restore the system
DC voltage . If the light is still not on, please contact our
after-sales service.
The light is yellow in normal static state, red in fault protection
state, yellow flashing when charging and red flashing when
46