Vision REVO Product User Manual page 37


The 24V power supply of GBMS is controlled by an isolating switch
with fuse.
Figure 10.7 DC24V connect for parallels

CBMS parallel communication connect
Step 6.
CBMS parallel communication adopts RJ45 physical interface, which is realized by
COM1/COM2 of CBMS.Refer to section 5.3 for an introduction to the CBMS
interface.The figure below is the schematic diagram of REVO series for parallels. The
system realizes communication connection in the form of communication Daisy chain. For
non-IPC(Industrial Personal Computer) version, the parallel number shall be ≤15 cabinets
37