Wet System - Husqvarna K970 SmartGuard Workshop Manual

5. Use the assembly support to make the bearing
housing level.
6. Put the axle with the blade shaft bearing in the
bearing housing with the spacer down.
7. Use a plastic hammer and push down the axle.
1451 - 001 - 02.04.2020

6.15 Wet system

6.15.1 Function of the wet system
Each side of the blade guard has a spray nozzle. The
water hits a section of the cutting blade and the
centrifugal force moves it out to the edge.
• The spray nozzles are available in many different
hole diameters.
• Find the correct nozzle in the spare parts list.
Repair and servicing - 65